2013년 11월 22일 금요일

3COM 3M0-211 덤프자료

근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. 3COM인증 3M0-211시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이3COM인증 3M0-211시험을 한방에 패스하도록 실제시험문제에 대비한3COM인증 3M0-211덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.

3COM인증3M0-211시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로3COM인증3M0-211시험준비를 잘하시면 100%3COM인증3M0-211시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은3COM인증3M0-211시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.

ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 3COM 인증3M0-211 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. 3COM 인증3M0-211 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.

시험 번호/코드: 3M0-211
시험 이름: 3COM (Certified Enterprise LAN Specialist )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2013-11-21

ITExamDump의 3COM인증 3M0-211시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 3COM인증 3M0-211시험덤프로 어려운 3COM인증 3M0-211시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.

3M0-211 덤프무료샘플다운로드하기: http://www.itexamdump.com/3M0-211.html

NO.1 Which three are benefits/features of the 3Com XRN technology? (Choose three)
A. Ensure continuous network availability
B. Supports enhanced network performance
C. Can be created using any IP-based switch
D. Create a path for future-proofing the network
E. Eliminates the need for hardware redundancy to achieve maximum network resiliency
Answer: A,B,D

3COM시험문제   3M0-211기출문제   3M0-211자료   3M0-211자료   3M0-211 dump   3M0-211

NO.2 Which two should be verified on either the Switch 7700 or the Switch 8800 when the
network is experiences a RIP problem? (Choose two)
A. Check if BP is enabled on the switches using RIP
B. Check if the RIP versions are the same on the router interfaces
C. Use the "display RIP-statistics" command to check all RIP routes on the switch
D. Use the "display RIP packet" command to check if the switch is sending/receiving RIP
updates
E. Use the "debugging RIP packet" command to check if the switch is sending/receiving
RIP updates
Answer: B,E

3COM자료   3M0-211   3M0-211인증   3M0-211

NO.3 Which two should you verify on either the Switch 7700 or the Switch 8800 if the
network is experiencing an Open Shortest Path First (OSPF) problem? (Choose
two)
A. OSPF is enabled on all switch ports
B. VRRP is properly configured on the switch ports supporting OSPF
C. The Link State Database is the same for all routers in an OSPF area
D. The switch is sending/receiving OSPF Hello packets and Link State updates
Answer: C,D

3COM자료   3M0-211 dumps   3M0-211   3M0-211   3M0-211덤프   3M0-211최신덤프

NO.4 Which three are Quality of Service (QoS) features/functions on the Switch 8800?
(Choose three)
A. Has eight output queues per port
B. Supports Differentiated Services (DiffServ)prioritization
C. Uses a Randam Early Detection (RED) queue prioritization
D. Uses a Weihted Random Early Detection (WRED) queue prioritization
E. Can configure the priority queues "globally" across all I/O interfaces on a switch
F. Uses Resource Reservation Protocol (RSVP) to allocate bandwidth for high-priority
applications
Answer: A,B,D

3COM   3M0-211자격증   3M0-211   3M0-211

NO.5 Which three components are required to create a local XRN solution (excluding the
appropriate 3Com switches? (Choose three)
A. 3Com Network Supervisor
B. XRN Fabric interconnect Modules
C. High-Bandwidth interconnect Cable
D. Gigabit Multilayer Switching Software V3.x
E. Gigabit Ethernet Layer switching modules
Answer: B,C,D

3COM   3M0-211최신덤프   3M0-211   3M0-211   3M0-211인증   3M0-211자료

NO.6 The Switch 7700 or Switch 8800 can be used as the primary authentication service
or as a backup if the RADIUS server group is unavailable.
A. True
B. False
Answer: A

3COM pdf   3M0-211자료   3M0-211

NO.7 Which three are advantages of using 3Com's XRN Distribution Resilient Routing
(DRR) over Virtual Router Redundancy Protocol (VRRP)? (Choose three)
A. DRR is easy to configure and administer, VRRP is more complex to manage
B. DRR supports both IP unicast and IP multicast traffic, VRRP only supports IP unicast
routing
C. DRR fast failover is less than five seconds, VRRP fast failover can take as long as 60
seconds
D. DRR distributes routing table updates only, VRRP distributes the entire routing table
to update other devices
E. DRR distributes routing across all switches in the XRN Distributed Fabric on the
router interfaces, VRRP uses a single Master router for all routing
Answer: A,B,E

3COM   3M0-211   3M0-211자료   3M0-211최신덤프

NO.8 Which three are true statements regarding 10 Gigabit technology and/or 3Com
products? (Choose three)
A. The 3 Com XFP 10G Fiber Transceivers use LC connects
B. IEEE 802.3X defines the 10GBASE-CX4 standard for Twin axial
C. 3Com supports 10G interface Modules for both the Switch 7700 and Switch 8800
D. The 10GBASE-T standard requires four-pair Category 5 or two-pair Category 6 UTP
wiring
Answer: A,B,C

3COM최신덤프   3M0-211   3M0-211인증

NO.9 Exhibit:
Which three Ethernet modes are supported on the Switch 7700 8-port
1000BASE-T(3c16859)Interface Module? (Choose three)
A. 10 Mbps in full duplex only
B. 10 Mbps in half/full duplex mode
C. 100 Mbps in full duplex mode only
D. 100 Mbps in half/full duplex mode
E. 1000 Mbps in full duplex mode only
F. 1000 Mbps in half/full duplex mode
Answer: B,D,E

3COM   3M0-211   3M0-211최신덤프

NO.10 Which component of XRN technology is defined as "A set of interconnected
switches that support Distributed Device Management (DDM), Distributed Link
Aggregation (DLA) and Distributed Resilient Routing (DRR)"?
A. XRN Interconnect
B. XRN Distributed Fabric
C. XRN Interconnect Fabric
D. XRN Distributed Software
Answer: B

3COM자격증   3M0-211   3M0-211   3M0-211인증

NO.11 What is the benefit of using the Switch 40x0 Family's Spanning Tree Ignore/Disable
feature?
A. Prevents disassociation of Layer 2 traffic from Layer 3 traffic.
B. Enables use of a routing protocol at Layer 2 to make forwarding decisions
C. Enables use of spanning Tree Protocol (STP) at Layer 3 to prevent loops in the
network
D. Supports use of routing paths at Layer 3, while Spanning Tree Protocol (STP)
manages Layer 2 switched links
Answer: D

3COM   3M0-211 dumps   3M0-211   3M0-211

NO.12 Which two are functions of Switch 40x0 Family Multinetting? (Choose two)
A. Automatically assigns multiple VLANs on each router interface
B. Floods traffic from different subnets on the same broadcast domain
C. Enables configuration of multiple router interfaces for each VLan/broadcast domain
D. Enables multiple VLANs/broadcast domains to be configured for each router interface
Answer: B,C

3COM기출문제   3M0-211 pdf   3M0-211덤프

NO.13 Which three are security-design features that can be employed in enterprise
networks to improve security? (Choose three)
A. Enable IEEE 802 d link aggregation
B. Turn off IGMP snooping on all access-layer switches
C. Provide security for active devices using local or RADIUS authentication
D. Support IEEE 802.1X Network Login for authentication and authorization
E. Provide separate VLANs for management and wireless users with a VLAN-centric
design
F. Employee TCP Windowing and or IEEE802.3X Flow Control to minimize effects of
network attacks
Answer: C,D,E

3COM   3M0-211자료   3M0-211   3M0-211

NO.14 Which three are recommended guidelines for an XRN network? (Choose three)
A. Only enable Rapid Spanning Tree Protocol (RSTP) or Spanning Tree Protocol (STP)
on edge switches
B. Do not insert Fabric interconnect Modules into the Super Stack 3 Switch 4900 or
Switch 40x0 switches
C. Run the same version of the Gigabit Multilayer Switching (MS) Software (4Xor
higher) across the fabric
D. Use fault-tolerant 3Comhardware, i.e the Switch 40x0 family that provides additional
levels of hardware fault tolerance
E. The XRN Fabric Modules should be installed while the fabric switch powered on. Hot
swapping XRN Fabric Modules is also recommended in the event of a failure
Answer: B,C,D

3COM   3M0-211   3M0-211인증   3M0-211

NO.15 What is the maximum number of Linux Aggregation load-balancing groups
supported on the Switch 7700?
A. 4 groups
B. 13 groups
C. 24 groups
D. 64 groups
E. 128 groups
Answer: D

3COM시험문제   3M0-211   3M0-211   3M0-211

NO.16 Which three are key requirements for the Access Layer (edge) of the network?
(Choose three)
A. Multilayer traffic prioritization
B. Multiple priority queues per port
C. Hardware-based Access Control List (ACLs)
D. Rate limiting and remarking for outgoing traffic.
E. MAC address authorization or IEEE 802.1X Network Login
F. Resource Reservation Protocol (RSVP) bandwidth allocation
Answer: A,B,E

3COM   3M0-211시험문제   3M0-211인증   3M0-211인증

NO.17 Which Switch 7700 command would show if Port#4 on Ethernet Module #2 is a
member of a Link Aggregation (LA) group and is the "LA Master Port"?
A. display interface Ethernet 2/4
B. display interface Ethernet 2/04
C. display interface Ethernet 4/0/2
D. display link-aggregation Ethernet 2/4
E. display link-aggregation Ethernet 2/0/4
F. display link-aggregation Ethernet 4/0/2
Answer: B

3COM   3M0-211   3M0-211   3M0-211   3M0-211

NO.18 Which four are Switching Fabric features/Functions on the Switch 8800? (Choose
four)
A. Each Switch Fabric has a data channel to every module
B. Supports a hot-swappable, load-balancing Switch Fabric.
C. There is a data channel between the two Switch Fabrics.
D. Each Switch Fabric has a management channel to every module
E. Supports a hot-standby, hot-swappable redundant Switch Fabric
F. The master Switch Fabric is always set to slot #1 unless the fabric in slot #1 fails
G. The master Switch Fabric provides route calculation and management for the entire
chassis
Answer: A,B,C,E

3COM   3M0-211기출문제   3M0-211인증   3M0-211자격증

NO.19 Which command shows the Quality of Service (QoS) settings for interface Modules
#2 Ethernet port #6 on the Switch 7700?
A. display qos Ethernet 6/2 all
B. display qos Ethernet 2/0/6 all
C. display qos-interface Ethernet 2/0/6 all
D. display qos-interface Ethernet 6/0/2 all
Answer: C

3COM자료   3M0-211   3M0-211   3M0-211   3M0-211 dump   3M0-211자료

NO.20 Which two rules must be followed when configuring Link Aggregation groups on
the Switch 7700 1000BASE-T and 1000BASE-X modules? (Chosse two)
A. The Linux Aggregation group can start on any port.
B. All the ports in a Link Aggregation group must be consecutive
C. A single Link Aggregation group can span multiple Interface Modules
D. A maximum of eight ports can belong to a single Link Aggregation group
E. A maximum of twelve ports can belong to a single Link Aggregation roup
Answer: A,B

3COM dumps   3M0-211덤프   3M0-211

ITexamdump의 1Z0-511덤프의 VCE테스트프로그램과 000-456덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-462시험에 대비한 고품질 덤프와 000-622시험 최신버전덤프를 제공해드립니다. 최고품질 000-277시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/3M0-211.html

댓글 없음:

댓글 쓰기