Microsoft 70-545-Csharp 인증시험

Microsoft인증70-545-Csharp시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Microsoft인증70-545-Csharp시험패스로 꿈을 이루어주는 사이트입니다. 우리는Microsoft인증70-545-Csharp시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Microsoft인증70-545-Csharp시험을 응시할 수 있는 자료입니다.

거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Microsoft인증 70-545-Csharp시험은 무조건 패스해야 합니다. 하지만Microsoft인증 70-545-Csharp시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Microsoft인증 70-545-Csharp시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Microsoft인증 70-545-Csharp덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Microsoft인증 70-545-Csharp영어버전덤프만 공부하시면 자격증을 딸수 있습니다.

ITExamDump는ITExamDump의Microsoft인증 70-545-Csharp덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의Microsoft인증 70-545-Csharp덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에Microsoft 70-545-Csharp인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증70-545-Csharp시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로Microsoft인증70-545-Csharp험을 패스하실 수 있습니다,

시험 번호/코드: 70-545-Csharp
시험 이름: Microsoft (TS:Microsoft Visio 2007, Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 54 문항
업데이트: 2013-12-17

70-545-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-545-Csharp.html

NO.1 You plan to create a timeline diagram by using Microsoft Office Project 2007. You need to ensure
that the Project data can be imported into Office Visio 2007 by using the Import Timeline Wizard. What
should you do?
A. In Project, save the data as a Microsoft Project File (*.mpp).
B. In Project, save the data as a Microsoft Project Database (*.mpd).
C. In Project, save the data as a Microsoft Project Workspace (*.mpw).
D. In Project, save the data as a Microsoft Project Exchange (*.mpx).
Answer: A

Microsoft   70-545-Csharp   70-545-Csharp최신덤프   70-545-Csharp

NO.2 You need to create an organization chart of employees by using a comma-separated values (CSV) file
and the Organization Chart Wizard. Which two columns must the CSV file contain? (Each correct
answer presents part of the solution. Choose two.)
A. A column that uniquely identifies each employee
B. A column that identifies each employees job title
C. A column that contains each employees department
D. A column that identifies who each employee reports to
Answer: AD

Microsoft시험문제   70-545-Csharp   70-545-Csharp

NO.3 You have an ODBC database that contains information that you want to display in Office Visio 2007.
You need to update the database records by modifying shape data from Visio 2007. What are three
possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. In Visio, use the Link Data to Shapes command from the Data menu.
B. In Visio, point to Visio Extras, start the Database Wizard, and then click Link shapes to database
records.
C. In Visio, click Import Data on the Plan menu.
D. In Visio, point to Visio Extras and click Link to ODBC Database.
E. Create custom code functions to read data from the data source, update the Shape Data rows, and
then write the data to the data source.
Answer: BDE

Microsoft   70-545-Csharp자격증   70-545-Csharp덤프

NO.4 You need to create two PivotDiagrams in Office Visio 2007 by using the minimum number of Visio
documents and pages. What should you do?
A. Create two new Visio documents by using the PivotDiagram template.
B. Create a new Visio document by using the PivotDiagram template. Insert a PivotDiagram into the
existing page.
C. Create a new Visio document by using the PivotDiagram template. Insert a new page, and then insert
the PivotDiagram into the new page.
D. Create two new Visio documents by using the PivotDiagram template. Copy the PivotDiagram from
one document to a blank page in the other document.
Answer: B

Microsoft자료   70-545-Csharp   70-545-Csharp

NO.5 You have a drawing that contains custom shape data. You need to export the shape data to a new
Microsoft Office Excel 2007 workbook. What should you do?
A. Use the Database Wizard.
B. Use the Reports command.
C. Use the Export to Database command.
D. Save the file as an XML drawing.
Answer: B

Microsoft   70-545-Csharp   70-545-Csharp

NO.6 You have a shape that contains a Shape Data row named Grade, where Type=0. You need to modify
the Grade row so that it is visible and read-only within the Shape Data window and the Shape Data dialog
box. What should you do?
A. In the Prop.Grade row, change the value of the Type cell to 9.
B. In the Prop.Grade row, change the value of the Type cell to 1, and the formula in the Format cell to
=Prop.Grade.
C. In the Prop.Grade row, change the formula in the Format cell to =LOCK.
D. Insert a new user-defined cell with the formula =
DEPENDSON(Prop.Grade)+SETF(GetRef(Prop.Grade),Prop.Grade).
Answer: B

Microsoft   70-545-Csharp최신덤프   70-545-Csharp시험문제   70-545-Csharp   70-545-Csharp기출문제   70-545-Csharp dump

NO.7 An External Data recordset named Computer Inventory contains a column named MachineSN. You
create a new Office Visio 2007 diagram and load the Computers and Monitors stencil. A shape named PC
Master from the Computers and Monitors stencil has a Shape Data row labeled Serial Number. To add
a shape to the Visio 2007 diagram, you select the PC Master shape, and then drag and drop a row from
the External Data window to the Visio 2007 page. You notice that the new shapes Serial Number row is
empty. You need the values from the MachineSN column to be entered automatically into the row
labeled Serial Number when you add the shape. What should you do?
A. Change the name of the External Data recordsets column from MachineSN to Serial Number.
B. Change the name of the External Data recordset from Computer Inventory to Serial Number.
C. Modify the PC Master shape on the document stencil. Change the row name of the shape data row
from Serial Number to MachineSN.
D. Copy the PC Master shape to the document stencil. Change the label of the shape data row from
Serial Number to _visDM_MachineSN.
Answer: A

Microsoft   70-545-Csharp   70-545-Csharp

NO.8 You create a shape that has two Shape Data rows named Department and CostCode. Both the
Department and the CostCode rows have the Type =1.
The Department row Format cell has the formula =A;B.
You need to modify the ShapeSheet to meet the following requirements:
When a user selects Department A, only CostCodes A1 and A2 are visible.
When a user selects Department B, only CostCodes B1 and B2 are visible.
What should you do?
A. Insert a new user-defined cell and enter the formula =SETF(GetRef(Prop.CostCode.Format), =
INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|"))
B. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2")
C. Enter the following formula in the Format cell of the CostCode Shape Data row.
=""""&INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")&""""
D. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")
Answer: D

Microsoft   70-545-Csharp   70-545-Csharp   70-545-Csharp dump

NO.9 You need to link a master shape to an ODBC database. The master shape must display the Update
Database Record command when you right-click the shape. What should you do?
A. In Office Visio 2007, run the Database Wizard.
B. From Control Panel, add a new ODBC data source.
C. In Office Visio 2007, run the Database Export Wizard.
D. In Office Visio 2007, run the Export to Database command.
Answer: A

Microsoft   70-545-Csharp   70-545-Csharp   70-545-Csharp   70-545-Csharp자격증   70-545-Csharp덤프

NO.10 You receive an XML data file and a separate XML schema file. The XML schema file describes the XML
data. You need to load the XML data file into the External Data window. Which two actions should
you perform? (Each correct answer presents part of the solution. Choose two.)
A. Transform the XML data file into the classic ActiveX Data Objects (ADO) RowsetSchema format.
B. Verify that the XML data file is well-formed and uses the namespace
http://schemas.microsoft.com/visio/2006/extension.
C. In a code module, use the DataRecordsets object Add method in the Office Visio 2007 document.
D. In a code module, use the DataRecordsets object AddFromXML method in the Office Visio 2007
document.
Answer: AD

Microsoft시험문제   70-545-Csharp자격증   70-545-Csharp

ITexamdump의 E20-553덤프의 VCE테스트프로그램과 VCP-510덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-463시험에 대비한 고품질 덤프와 MB2-866시험 최신버전덤프를 제공해드립니다. 최고품질 700-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-545-Csharp.html