Cisco 642-883 시험문제

한번에Cisco인증642-883시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.

ITExamDump는 여러분이 빠른 시일 내에Cisco 642-883인증시험을 효과적으로 터득할 수 있는 사이트입니다.Cisco 642-883덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Cisco 642-883관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Cisco 642-883덤프로 자신 있는 시험준비를 하세요.

ITExamDump는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. Cisco인증 642-883시험을 등록하신 분들은 바로ITExamDump의Cisco인증 642-883덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.

시험 번호/코드: 642-883
시험 이름: Cisco (Deploying Cisco Service Provider Network Routing (SPROUTE) )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 82 문항
업데이트: 2014-04-22

Cisco 642-883인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. Cisco 642-883덤프는ITExamDump제품이 최고랍니다.

642-883 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-883.html

NO.1 Refer to the OSPF command exhibit.
Which effect does the no-summary command option have?
A. It will cause area 1 to be able to receive non-summarized inter-area routes.
B. It will cause area 1 to not receive any inter-area routes and will use a default route to reach networks in
other areas.
C. It will cause area 1 to not receive any external routes and will use a default route to reach the external
networks.
D. It will convert the NSSA area into a NSSA totally stubby area.
E. It will convert the stubby area into a NSSA.
F. It will disable OSPF auto-summary.
Answer: B

Cisco   642-883   642-883   642-883   642-883

NO.2 Which two OSPF network scenarios require OSPF virtual link configuration? (Choose two.)
A. to connect an OSPF non-backbone area to area 0 through another non-backbone area
B. to connect an NSSA area to an external routing domain
C. to connect two parts of a partitioned backbone area through a non-backbone area
D. to enable route leaking from Level 2 into Level 1
E. to enable route leaking from Level 1 into Level 2
F. to enable OSPF traffic engineering
Answer: A,C

Cisco   642-883자료   642-883   642-883인증

NO.3 When configuring IPv4 and IPv6 IS-IS routing on Cisco IOS XR routers, which three statements are
correct? (Choose three.)
A. By default, a single SPF is used for both IPv4 and IPv6, so the IPv4 and IPv6 topology should be the
same.
B. By default, the IS-IS router type is Level 1 and Level 2.
C. All IS-IS routers within the same IS-IS area must be configured with the same IS-IS routing process
instance ID.
D. By default, metric-style narrow is used.
E. By default, the IS-IS interface circuit type is Level 1 and Level 2.
F. The area IS-IS address-family configuration command is used to specify the IS-IS area address.
Answer: B,D,E

Cisco   642-883자격증   642-883 dump   642-883   642-883

NO.4 When troubleshooting OSPF neighbor errors, which three verification steps should be considered.?
(Choose three.)
A. Verify if neighboring OSPF interfaces are configured in the same area.
B. Verify if neighboring OSPF interfaces are configured with the same OSPF process ID.
C. Verify if neighboring OSPF interfaces are configured with the same OSPF priority.
D. Verify if neighboring OSPF interfaces are configured with the same hello and dead intervals.
E. Verify if neighboring OSPF interfaces are configured with the same area type.
Answer: A,D,E

Cisco   642-883인증   642-883자료   642-883자료   642-883

NO.5 Which four statements are correct regarding IS-IS operations? (Choose four.)
A. By default, Level 1 routers within an IS-IS area do not carry any routing information external to the area
to which they belong. They use a default route to exit the area.
B. Summarization should be configured on the Level 2 routers, which injects the Level 2 routes into Level
1.
C. IS-IS supports "route leaking" in which selected Level 2 routes can be advertised by a Level 1/Level 2
router into Level 1.
D. The IS-IS backbone is a contiguous collection of Level 1 capable routers, each of which can be in a
different area.
E. With IS-IS, an individual router is in only one area, and the border between areas is on the link that
connects two routers that are in different areas.
F. Cisco IOS XR Software supports multitopology for IPv6 IS-IS unless single topology is explicitly
configured in IPv6 address-family configuration mode.
Answer: A,C,E,F

Cisco   642-883   642-883   642-883   642-883

NO.6 Refer to the PE1 router routing table output exhibit.
What is causing the i su 10.1.10.0/24 [115/30] via 0.0.0.0, 00:40:34, Null0 entry on the PE1 router routing
table?
A. The PE1 router is receiving the 10.1.10.0/24 summary route from the upstream L1/L2 IS-IS router.
B. The PE1 router has been configured to summarize the 10.1.10.x/32 IS-IS routes to 10.1.10.0/24.
C. The 10.1.10.0/24 has been suppressed because IS-IS auto-summary has been disabled on the PE1
router.
D. The 10.1.10.0/24 has been suppressed because of a route policy configuration on the PE1 router.
E. The 10.1.10.0/24 has been suppressed because the more specific 10.1.10.x/32 IS-IS routes have
been configured to leak into the IS-IS non-backbone area.
Answer: B

Cisco   642-883최신덤프   642-883   642-883   642-883시험문제   642-883

NO.7 What is function of the RP/0/RSP0/CPU0:PE1(config-ospf)#distance Cisco IOS-XR command?
A. To modify the administrative distance of the OSPF routes
B. To modify the default seed metric of the OSPF external routes
C. To modify the OSPF default reference bandwidth
D. To modify the OSPF cost
Answer: A

Cisco   642-883   642-883

NO.8 In comparing IS-IS with OSPF, a Level-1-2 IS-IS router is similar to which kind of OSPF router?
A. ASBR on a normal OSPF area
B. ASBR on NSSA
C. ABR on totally stubby OSPF area
D. ABR on stubby OSPF area
E. ABR on a normal OSPF area
Answer: C

Cisco시험문제   642-883인증   642-883   642-883기출문제

NO.9 Which three statements are true regarding the OSPF router ID? (Choose three.)
A. The OSPF routing process chooses a router ID for itself when it starts up.
B. The router-id command is the preferred procedure to set the router ID.
C. If a loopback interface is configured, its address will always be preferred as the router ID over any
other methods.
D. After the router ID is set, it does not change, even if the interface that the router is using for the router
ID goes down. The router ID changes only if the router reloads or if the OSPF routing process restarts.
E. In OSPF version 3, the OSPF router ID uses a 128-bit number.
Answer: A,B,D

Cisco덤프   642-883 dumps   642-883 dumps   642-883 dump

NO.10 On Cisco IOS XR Software, which set of commands is used to enable the gi0/0/0/1 interface for OSPF
in area 0?
A. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0
B. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 255.255.255.255
area 0
C. router ospf 1 area 0 interface GigabitEthernet0/0/0/1
D. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ip ospf 1 area 0
E. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
F. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
Answer: C

Cisco덤프   642-883   642-883

ITexamdump의 C2020-010덤프의 VCE테스트프로그램과 C_HANATEC_1덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB7-702시험에 대비한 고품질 덤프와 000-955시험 최신버전덤프를 제공해드립니다. 최고품질 700-039시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/642-883.html