우리 ITExamDump에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Microsoft MB3-700인증시험을 패스하고 싶으시다면 우리 ITExamDump를 장바구니에 넣으시죠 . ITExamDump는 여러분의 아주 좋은 합습가이드가 될것입니다. ITExamDump로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. Microsoft인증 77-601시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의Microsoft인증 77-601덤프로 자격증을 편하게 취득하는게 어떨가요?
우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft 070-561관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
ITExamDump는Microsoft인증MB3-700시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Microsoft인증MB3-700시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Microsoft인증MB3-700시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
시험 이름: Microsoft Dynamics GP 2013 Installation & Configuration
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 MB3-700 Dumps
100% 합격율 보장
Q&A: 75 문항 MB3-700국제자격증
업데이트: 2014-05-15
MB3-700 Dumps: >>펼쳐보기
시험 이름: MOS: Using Microsoft Office Word 2007
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 77-601시험
100% 합격율 보장
Q&A: 180 문항 77-601최신덤프
업데이트: 2014-05-15
77-601시험: >>펼쳐보기
시험 이름: TS: MS .NET Framework 3.5, ADO.NET Application Development
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 070-561자격증
100% 합격율 보장
Q&A: 170 문항 070-561덤프
업데이트: 2014-05-15
070-561자격증: >>펼쳐보기
Microsoft MB3-700인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면Microsoft MB3-700인증시험이 아주 좋은 자격증입니다. 만약Microsoft MB3-700인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.
070-561 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-561.html
NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D
Microsoft인증덤프 070-561 070-561시험후기 070-561 pdf 070-561
NO.2 myConnection.Close();
NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
11 End Using
12 End Using
13 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B
Microsoft 070-561시험문제 070-561덤프자료 070-561교육
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1";
SqlCommand command = new SqlCommand(queryString, (SqlConnection)connection));
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. var value = command.ExecuteScalar();
string requiredValue = value.ToString();
B. var value = command.ExecuteNonQuery();
string requiredValue = value.ToString();
C. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[0].ToString();
D. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[1].ToString();
Answer: A
Microsoft 070-561 Dump 070-561 IT자격증시험
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub GetOrders(ByVal cn As SqlConnection)
02 Dim cmd As SqlCommand = cn.CreateCommand()
03 cmd.CommandText = "Select * from [Order]; " + _
"Select * from [OrderDetail];"
04 Dim da As New SqlDataAdapter(cmd)
05
06 End Sub
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS)
B. da.Fill(OrderDS.Order)
da.Fill(OrderDS.OrderDetail)
C. da.TableMappings.AddRange(New DataTableMapping() _
{New DataTableMapping("Table", "Order"), _
New DataTableMapping("Table1", "OrderDetail")})
da.Fill(OrderDS)
D. Dim mapOrder As New DataTableMapping()
mapOrder.DataSetTable = "Order"
Dim mapOrderDetail As New DataTableMapping()
mapOrder.DataSetTable = "OrderDetail"
da.TableMappings.AddRange(New DataTableMapping() _
{mapOrder, mapOrderDetail})
da.Fill(OrderDS)
Answer: C
Microsoft시험정보 070-561인증덤프 070-561
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(connectionString)
02 Dim cmd As New SqlCommand(queryString, connection)
03 connection.Open()
04
05 While sdrdr.Read()
06 ' use the data in the reader
07 End While
08 End Using
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader()
B. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.[Default])
C. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SchemaOnly)
D. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SequentialAccess)
Answer: D
Microsoft PDF 070-561 070-561 070-561기출문제 070-561 070-561
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C
Microsoft덤프 070-561자격증 070-561시험정보 070-561국제공인자격증 070-561시험일정
NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OdbcConnection(connectionString);
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OleDbConnection(connectionString);
C. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.Odbc");
DbConnection connection = factory.CreateConnection();
D. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory(databaseProviderName);
DbConnection connection = factory.CreateConnection();
Answer: D
Microsoft자료 070-561 070-561덤프 070-561자격시험
댓글 없음:
댓글 쓰기