꿈을 안고 사는 인생이 멋진 인생입니다. 고객님의 최근의 꿈은 승진이나 연봉인상이 아닐가 싶습니다. Symantec인증 ST0-12W시험은 IT인증시험중 가장 인기있는 국제승인 자격증을 취득하는데서의 필수시험과목입니다.그만큼 시험문제가 어려워 시험도전할 용기가 없다구요? 이제 이런 걱정은 버리셔도 됩니다. ITExamDump의 Symantec인증 ST0-12W덤프는Symantec인증 ST0-12W시험에 대비한 공부자료로서 시험적중율 100%입니다.
ITExamDump의Symantec ST0-12W인증시험의 자료 메뉴에는Symantec ST0-12W인증시험실기와Symantec ST0-12W인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Symantec ST0-12W인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Symantec 인증ST0-12W 인증시험으로 고민하시고 계십니까? Symantec 인증ST0-12W인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.
ITExamDump는 많은 분들이Symantec인증ST0-12W시험을 응시하여 성공하도록 도와주는 사이트입니다ITExamDump의 Symantec인증ST0-12W 학습가이드는 시험의 예상문제로 만들어진 아주 퍼펙트한 시험자료입니다. Symantec인증ST0-12W시험은 최근 가장 인기있는 시험으로 IT인사들의 사랑을 독차지하고 있으며 국제적으로 인정해주는 시험이라 어느 나라에서 근무하나 제한이 없습니다. ITExamDump로 여러분은 소유하고 싶은 인증서를 빠른 시일내에 얻게 될것입니다.
ITExamDump의 Symantec 인증 ST0-12W시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Symantec 인증 ST0-12W실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Symantec 인증 ST0-12W실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Symantec 인증 ST0-12W덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
시험 번호/코드: ST0-12W
시험 이름: Symantec (Veritas Cluster Server 5 for Windows (STS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2014-01-16
ST0-12W 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-12W.html
NO.1 A process is manually shut down to test an automatic failover of a configured Process resource. The
service group then fails over to another system. What should be cleared before bringing the service group
back to the system on which the test was originally conducted?
A. resource
B. attribute
C. cluster
D. system
Answer:A
Symantec ST0-12W dump ST0-12W덤프 ST0-12W
NO.2 You are designing a high availability solution for an important new application and you are in the
process of identifying single points of failure in the design. What are two possible single points of failure
that can be addressed by Veritas Cluster Server? (Choose two.)
A. network
B. stor~ge
C. processors
D. memory
E. environment
Answer:A,B
Symantec dumps ST0-12W인증 ST0-12W pdf ST0-12W시험문제 ST0-12W
NO.3 Which Symantec product feature or attribute allows for the same application to be started
simultaneously on different systems?
A. parallet service groups
B. Veritas FlashSnap
C. the online local dependency
D. the parallelstart group attribute
Answer:A
Symantec시험문제 ST0-12W ST0-12W ST0-12W ST0-12W최신덤프 ST0-12W dump
NO.4 Four servers available for clustering are located in two buildings. Each building contains two servers
and the servers are on the same network. There are two disk arrays to which all four servers have shared
data access. Which type of cluster topology is required?
A. campus cluster
B. global cluster
C. shared nothing cluster
D. split brain cluster
Answer:A
Symantec ST0-12W dumps ST0-12W
NO.5 A service group with the FaiioverPolicy set to Priority has a fault and is failing over. The group fail over
to the system with the __ .
A. lowest as siqne d value in the groups SystemList
B. highest assigned value in the groups SystemList
C. lowest number of service groups currently online
D. highest available capacity in the groups SystemList
Answer:A
Symantec ST0-12W ST0-12W인증
NO.6 Which two tasks can be performed to improve the overall fault tolerance of a Veritas Cluster Server
cluster? (Choose two.)
A. connect e ach system in the cluster to separate power sources DB. mirror the os disk of e ach system
in the cluster
C. connect a tape drive to each system in the cluster
D. add a local disk array to each system in the cluster
E. add CPUs to each node in the cluster
Answer:A,B
Symantec ST0-12W ST0-12W pdf
NO.7 You are tasked with making an existing production system highly available with Veritas Cluster Server.
You have already verified that the hardware is compatible with Veritas Cluster Server. You are now
evaluating the software on the systems for Veritas Cluster Server compatibility.
What must be verified for Veritas Cluster Server compatibility?
A. the oper~ting system version
B. the volume management software version
C. the NIC driver version
D. the file system version
Answer:A
Symantec인증 ST0-12W ST0-12W ST0-12W
NO.8 Several application service groups require their own virtuallP addresses to share a single NIC on each
system in a cluster. Which agent reduces the overhead associated with monitoring the NIC’ s
status?
A. proxy
B. MultiNICB
C. NIC
D. phantom
Answer: A
Symantec ST0-12W dump ST0-12W ST0-12W dumps ST0-12W
NO.9 You have one of three systems in a cluster up and running Veritas Cluster Server. When the second
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first system.
What happens?
A. Verltas Cluster Server uses the one from the first system.
B. Veritas Cluster Server uses the one from the second system.
C. Veritas Cluster Server will integrate the files.
D. Veritas Cluster Server will wait for the third system.
Answer:A
Symantec인증 ST0-12W ST0-12W ST0-12W ST0-12W
NO.10 You are modifying the cluster configuration while the cluster is stopped. You have edited and verified
the main.cf file on system SysA. Which command do you use to start the cluster with the new
configuration on system SysA?
A. hastart
B. haclus -rebuild .Imain .cr
C. hasys ?start SysA
D. hareconfig
Answer:A
Symantec ST0-12W ST0-12W기출문제 ST0-12W덤프 ST0-12W자격증
NO.11 You want to validate operation after installing, configuring, and starting Veritas Cluster Server. Which
two GAB ports should be shown as running? (Choose two.)
A. a
B. c
C. h
D. S
E. V
Answer:A,C
Symantec ST0-12W dumps ST0-12W ST0-12W인증 ST0-12W덤프
NO.12 Which command do you use to change a service group attribute in a running cluster?
A. h~grp ?modify
B. hagrp ?change
C. hamodify ?group
D. hamodify ?attribute
Answer:A
Symantec덤프 ST0-12W덤프 ST0-12W ST0-12W시험문제 ST0-12W
NO.13 What is the Veritas Cluster Server term for how a system joining an existing cluster retrieves the cluster
configuration?
A. remote build
B. local build
C. onetime build
D. initial build
Answer:A
Symantec ST0-12W인증 ST0-12W자료 ST0-12W인증 ST0-12W기출문제 ST0-12W
NO.14 What are three possible types of Veritas Cluster Server service groups? (Choose three.)
A. Failover
B. Hybrid
C. Parallel
D. Singlenode
E. OnOnly
Answer: A,B,C
Symantec ST0-12W ST0-12W dumps ST0-12W
NO.15 Where are configuration changes maintained in a running Veritas Cluster Server cluster?
A. memory on ~II systems
B. disk on all systems
C. memory on quorum system
D. disk on quorum system
Answer:A
Symantec dump ST0-12W기출문제 ST0-12W자격증 ST0-12W
NO.16 Which three elements must be moved from the failed server to the takeover server for network users to
resume access to the database when a failover occurs? (Choose three.)
A. the vtrtuat ts address
B. the set of processes
C. the Ethernet address
D. the public key
E. the disk group
Answer:A,B,E
Symantec ST0-12W최신덤프 ST0-12W최신덤프 ST0-12W자료
NO.17 What is the Veritas Cluster Server service that maintains resource configuration and state
information?
A. h~d
B. hastate
C. haconf
D.hacf
Answer: A
Symantec자료 ST0-12W기출문제 ST0-12W ST0-12W
NO.18 You have two of three systems in a cluster up and running Veritas Cluster Server. When the third
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first two systems.
How does Veritas Cluster Server handle this situation?
A. It will use the configur~tion from the first two systems.
B. It will use the configuration from the third system.
C. It will integrate the files to resolve the differences.
D. The third node will be unable to start.
Answer:A
Symantec덤프 ST0-12W pdf ST0-12W ST0-12W pdf ST0-12W
NO.19 Which characteristic must an application have in order to be managed by Veritas Cluster Server?
A. It must be re startable to ~ known state after failure and tattover.
B. It must be startable by a user other than the system account.
C. It must be a stateless application.
D. It must be capable of running on all systems simultaneously.
Answer:A
Symantec기출문제 ST0-12W ST0-12W자료
NO.20 What are two valid settings for the ManageFaults service group attibute? (Choose two.) A . All
B. None
C.Priority
D. MonitorOnly
E. Manual
Answer: A,B,
Symantec덤프 ST0-12W ST0-12W ST0-12W ST0-12W
ITexamdump의 600-199덤프의 VCE테스트프로그램과 HP2-E58덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB5-854시험에 대비한 고품질 덤프와 VCP-510시험 최신버전덤프를 제공해드립니다. 최고품질 050-SEPROGRC-01시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기