Adobe 자격증 9A0-057 시험문제와 답

목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? Adobe인증 9A0-057시험을 패스하는 길에는ITExamDump의Adobe인증 9A0-057덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의Adobe인증 9A0-057덤프는 시험문제에 초점을 두어 제작된 공부자료이기에Adobe인증 9A0-057패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.

ITExamDump의Adobe인증 9A0-057덤프는 인터넷에서 검색되는Adobe인증 9A0-057시험공부자료중 가장 출중한 시험준비 자료입니다. Adobe인증 9A0-057덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.

시험 번호/코드: 9A0-057

시험 이름: Adobe (Adobe Illustrator CS3 ACE Exam)

Adobe인증 9A0-057시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Adobe인증 9A0-057시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Adobe인증 9A0-057덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Adobe인증 9A0-057덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.

안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Adobe 9A0-057인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Adobe 9A0-057문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Adobe 9A0-057인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.

ITExamDump에서 출시한 Adobe 인증 9A0-057시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.

Adobe인증 9A0-057시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. Adobe인증 9A0-057인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. ITExamDump 의 Adobe인증 9A0-057덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전Adobe인증 9A0-057무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.

ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Adobe인증9A0-057시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이Adobe인증9A0-057시험에 대한 부담은 사라질 것입니다.

9A0-057 덤프무료샘플다운로드하기: http://www.itexamdump.com/9A0-057.html

NO.1 Click the Exhibit button.
You are creating a sales brochure based on a sample provided by your client. In the sample, the
punctuation appears outside the width of the justified type. What should you do to create the desired
effect without affecting the ability to edit the type?
A. Use the Paragraph panel to apply hanging left and right indents when punctuation appears near the
margins.
B. Set up guides on a grid, setting each line individually and positioning each line to force the punctuation
over the guides.
C. Delete the punctuation that falls near the margins and set the punctuation as separate type elements
outside the margins.
D. Use the Paragraph panel to apply Roman Hanging Punctuation.
Answer: D

Adobe최신덤프   9A0-057   9A0-057 dump   9A0-057

NO.2 You create a grouped set of objects and apply an opacity setting from 10 percent to 50 percent. You
want the set of objects to blend with the background without having an overlapping effect. What should
you do?
A. Apply Isolate Blending.
B. Apply Knockout Group.
C. Apply the Opacity & Mask Define Knockout shape.
D. Increase the opacity of all objects.
Answer: B

Adobe   9A0-057   9A0-057   9A0-057   9A0-057 dump

NO.3 You want to create a paragraph of justified text and hang the punctuation so that the right and left
sides of the paragraph maintain a clean, aligned appearance. What should you do?
A. Select the type object and choose Type > Optical Margin Alignment.
B. Use the Smart Punctuation command and enable Smart Quotes.
C. Enable Discretionary Ligatures in the OpenType panel.
D. Enable Optical Tracking in the Character panel.
Answer: A

Adobe   9A0-057덤프   9A0-057   9A0-057   9A0-057

NO.4 You create a logo and add a patterned background to it. In the Appearance panel, you duplicate the fill
and create a gradient fill on the top of the patterned background. However, you are unable see the pattern
fill below the gradient fill. What should you do?
A. Change the stacking order to place the pattern background in front of the gradient.
B. Select the Reduce to Basic Appearance option in the Appearance panel.
C. Select the gradient fill and apply a blend mode.
D. Change the opacity settings of the pattern.
Answer: C

Adobe   9A0-057   9A0-057자료   9A0-057

NO.5 You want to create an object to be used at several locations on a poster. You draw the object in a
document, save the object as a symbol, and apply the symbol multiple times. You want to change the
color of the original object without affecting the existing symbols applied to the poster. What should you
do?
A. Copy and paste the symbol in the document to break the link with the Symbols panel.
B. Select each object in the poster and click the Break Link to Symbol button in the Symbols panel.
C. Select the applied symbols in the poster and choose Expand to break the link.
D. Select the object and choose Redefine Symbol in the Symbols panel menu to break the link.
Answer: B

Adobe pdf   9A0-057   9A0-057   9A0-057최신덤프   9A0-057 dumps

NO.6 You convert a photograph to a black and white line art image by using the Live Trace command. You
want to add a few colors to the photo. You choose Object > Live Trace > Tracing Options. What should
you do?
A. Change Mode to Color and adjust the Resample resolution.
B. Select Adjusted Image from the Raster drop-down list and select the Output to Swatches check box.
C. Change Mode to Color and increase the value in Max Colors.
D. Specify a value for Minimum Area and select the Output to Swatches check box.
Answer: C

Adobe기출문제   9A0-057   9A0-057 dump

NO.7 You create an object by using the Pen tool and apply a 1 point stroke to the object. You want to
change the stroke to a calligraphic brush stroke without redrawing the object. What should you do?
A. Use the Brush tool to change the stroke to a calligraphic brush stroke.
B. Select the stroke and change it by using the Stroke panel.
C. Select the stroke and update the stroke in the Brushes panel.
D. Open the Brushes panel and click the Options of Selected Object button.
Answer: C

Adobe   9A0-057최신덤프   9A0-057기출문제   9A0-057

NO.8 You want to apply color to the headline of an advertisement. The gradient fill of the color must
complement the background image that is placed as a link in the document. You create a linear gradient
and apply the gradient to the type, but the type remains black. What should you do?
A. Drag the gradient onto the type with the Gradient tool.
B. Sample the gradient with the Eyedropper tool and apply it to the headline type.
C. Create a character style defining the gradient fill as a Character Color attribute and apply it to the
headline.
D. Use the Create Outlines command to make paths from the headline type and apply the gradient.
Answer: D

Adobe   9A0-057   9A0-057

NO.9 You create a new paragraph style from a selected, formatted paragraph and apply it as you type in
more text. You then decide to decrease the type size of the style by 1 point. The change is reflected in all
styled paragraphs except the original paragraph in which the paragraph style was defined. Why does this
happen?
A. The original formatted paragraph was legacy text.
B. The original text was imported from Microsoft Word. The Word formatting was still retained by the text,
overriding the Illustrator paragraph style.
C. Character styles were created after the paragraph style was applied to the other paragraphs.
D. The paragraph style was not applied to the selected text after creating the paragraph style from the
selected paragraph.
Answer: D

Adobe   9A0-057시험문제   9A0-057   9A0-057   9A0-057 dump

NO.10 What is the advantage of using an Envelope Distort warp on type artwork over applying a warp effect?
A. Envelope Distort allows you to encode the artwork by embedding the font in the Illustrator document.
B. Envelope Distort allows you to modify the shape of the envelope with the Direct Selection tool.
C. Envelope Distort allows you to create outlines and therefore, you are able to apply gradients and other
effects to the type.
D. Envelope Distort allows you to edit the effect after it is applied.
Answer: B

Adobe   9A0-057   9A0-057   9A0-057시험문제   9A0-057

NO.11 How does the OpenType font format differ from TrueType and Type 1 fonts?
A. OpenType is a format that can be modified. TrueType and Type 1 fonts CANNOT be modified.
B. OpenType can be used for both desktop printing and Web design. TrueType and Type 1 fonts can only
be used in PostScript printing.
C. OpenType is a cross-platform font format, and TrueType and Type 1 fonts are platform-specific font
formats.
D. OpenType refers to fonts that are outlined. TrueType and Type 1 refer to fonts that are solid.
Answer: C

Adobe   9A0-057   9A0-057   9A0-057

NO.12 You want to create an object by using a tool that allows you to connect lines and curves. The lines
must be smooth and the anchor points must be placed at all positions where a line or a curve changes
direction. Which tool should you use?
A. Pencil
B. Brush
C. Pen
D. Line
Answer: C

Adobe자격증   9A0-057   9A0-057기출문제   9A0-057기출문제

NO.13 You have an Illustrator document that has decorative ornament characters. You want to view all other
ornaments that are available in the fonts that are used in the document. Which panel should you use?
A. Character
B. Control
C. Glyphs
D. Character Styles
Answer: C

Adobe dump   9A0-057   9A0-057   9A0-057

NO.14 You are creating a drawing of a series of birds in flight. You draw a bird and you want to duplicate it
and change the angle of its direction. Each bird must rotate at an angle of 15 degrees from the last bird.
What should you do?
A. Select the bird and double-click the Rotate tool. Apply a 15-degree angle and click the Copy button to
copy the original bird.
B. Copy and paste the original bird. Use the Rotate tool to rotate the bird by using your mouse.
C. Use the Shear tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
D. Use the Reflect tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
Answer: A

Adobe기출문제   9A0-057   9A0-057기출문제   9A0-057

NO.15 You open a legacy document, loading the same font that was used during the document creation.
When you compare this document with a hard copy of the original document, you discover that the type in
the new document has reflowed. Why does this happen?
A. The type is converted to outline.
B. The file is saved in the EPS format.
C. The OpenType contextual alternates are enabled.
D. The type engines in Illustrator versions are different.
Answer: D

Adobe pdf   9A0-057   9A0-057   9A0-057

NO.16 You want to change an object's fill from solid to a gradient. You create the gradient and fill another
object in your document. What should you do to apply the gradient fill to the object?
A. Select the object and use the Eyedropper tool to select the gradient fill.
B. Select the object and use the Paint Brush tool to apply the gradient fill.
C. Select the object and use the Gradient tool to apply the gradient fill.
D. Select the gradient pattern in the Swatches panel.
Answer: A

Adobe dump   9A0-057 dump   9A0-057자격증

NO.17 You want to edit one line of type that is part of a paragraph in an existing document. Which tool should
you use?
A. Rectangle
B. Eraser
C. Area Type
D. Lasso
Answer: C

Adobe기출문제   9A0-057   9A0-057인증   9A0-057인증

NO.18 You are creating a conference schedule and want to specify a description for different seminars. The
same typographic attributes, including typeface, leading, and alignment, must be applied to each seminar
description. How should you apply these attributes?
A. Set one paragraph with the desired attributes and use the Bridge application to batch process the
attributes.
B. Create a paragraph style and apply it to the entire text.
C. Set one paragraph with the desired attributes, save as an EPS and place in the file.
D. Create a character style with the desired attributes and apply it to the entire text.
Answer: B

Adobe   9A0-057최신덤프   9A0-057 pdf   9A0-057시험문제

NO.19 You create an object and now you want to increase its size proportionately by 10 percent. You select
the object. What should you do?
A. Use the Scale tool while holding the OPTION key on a Mac computer or the ALT key on a
Windows-based computer.
B. Use the Free Transform tool.
C. Choose Show Bounding Box, and pull one corner of the object in the direction you wish to scale.
D. Double-click the Scale tool, and choose the Uniform option.
Answer: D

Adobe   9A0-057 pdf   9A0-057   9A0-057덤프

NO.20 You want to distort a rectangle by using the Envelope Distort option from the Object menu. What
should you do?
A. Choose Make with Mesh and select the rows and columns to distort the rectangle.
B. Choose Make with Warp and select the Style and Bend to distort the rectangle.
C. Choose Envelope Options and select the Distort Appearance check box in the Envelope Options
dialog box.
D. Choose Make with Top Object to distort the rectangle.
Answer: B

Adobe기출문제   9A0-057 dumps   9A0-057기출문제   9A0-057최신덤프

ITExamDump의Adobe인증9A0-057자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Adobe인증9A0-057시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.