Network Appliance 자격증 NS0-163 시험덤프

ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Network Appliance인증 NS0-163덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Network Appliance인증 NS0-163덤프는Network Appliance인증 NS0-163최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.

지금 같은 정보시대에, 많은 IT업체 등 사이트에Network Appliance NS0-163인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Network Appliance NS0-163자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.

시험 번호/코드: NS0-163

시험 이름: Network Appliance (Network Appliance Data Protection Solutions)

ITExamDump의 Network Appliance인증 NS0-163덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. Network Appliance인증 NS0-163덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.

그렇게 많은 IT인증덤프공부자료를 제공하는 사이트중ITExamDump의 인지도가 제일 높은 원인은 무엇일가요?그건ITExamDump의 제품이 가장 좋다는 것을 의미합니다. ITExamDump에서 제공해드리는 Network Appliance인증 NS0-163덤프공부자료는Network Appliance인증 NS0-163실제시험문제에 초점을 맞추어 시험커버율이 거의 100%입니다. 이 덤프만 공부하시면Network Appliance인증 NS0-163시험패스에 자신을 느끼게 됩니다.

NS0-163 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-163.html

NO.1 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B

Network Appliance자료   NS0-163자료   NS0-163 dumps

NO.2 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A

Network Appliance   NS0-163   NS0-163자료

NO.3 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D

Network Appliance시험문제   NS0-163   NS0-163 dumps   NS0-163덤프

NO.4 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD

Network Appliance   NS0-163자료   NS0-163   NS0-163

NO.5 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C

Network Appliance   NS0-163 dump   NS0-163   NS0-163

NO.6 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B

Network Appliance기출문제   NS0-163   NS0-163   NS0-163   NS0-163 pdf

NO.7 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance   NS0-163   NS0-163   NS0-163   NS0-163덤프   NS0-163자료

NO.8 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance pdf   NS0-163   NS0-163

NO.9 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D

Network Appliance   NS0-163최신덤프   NS0-163   NS0-163덤프

NO.10 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance   NS0-163인증   NS0-163 pdf   NS0-163기출문제   NS0-163

NO.11 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B

Network Appliance   NS0-163자격증   NS0-163자격증   NS0-163   NS0-163   NS0-163

NO.12 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D

Network Appliance dump   NS0-163 dumps   NS0-163인증   NS0-163

NO.13 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C

Network Appliance인증   NS0-163   NS0-163인증

NO.14 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D

Network Appliance   NS0-163덤프   NS0-163자료   NS0-163

NO.15 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A

Network Appliance   NS0-163   NS0-163   NS0-163

NO.16 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D

Network Appliance   NS0-163   NS0-163 dumps   NS0-163

NO.17 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A

Network Appliance dump   NS0-163   NS0-163인증   NS0-163   NS0-163 pdf

NO.18 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B

Network Appliance시험문제   NS0-163   NS0-163자료   NS0-163   NS0-163

NO.19 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance자료   NS0-163 dump   NS0-163최신덤프

NO.20 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C

Network Appliance덤프   NS0-163   NS0-163기출문제

Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Network Appliance인증NS0-163시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.