Oracle 인증 1Z0-242 덤프

Oracle인증 1Z0-242시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 Oracle인증 1Z0-242시험문제에 대비하여 제작한Oracle인증 1Z0-242덤프가 있다는 것을 모르고 있기때문입니다. Oracle인증 1Z0-242시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Oracle인증 1Z0-242덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.

ITExamDump를 선택함으로, ITExamDump는 여러분Oracle인증1Z0-242시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.

IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Oracle인증 1Z0-242시험에 도전하는 분이 많은데 ITExamDump에서 Oracle인증 1Z0-242시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.

시험 번호/코드: 1Z0-242

시험 이름: Oracle (PeopleSoft Application Developer II: App Engine and Integration)

Oracle인증 1Z0-242시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Oracle인증 1Z0-242시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Oracle인증 1Z0-242덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.

ITExamDump는Oracle 1Z0-242시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Oracle 1Z0-242시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Oracle 1Z0-242시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

1Z0-242 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-242.html

NO.1 You modify an Application Engine program to use parallel processing with temporary tables.
The Application Engine program includes this code snippet, which is part of a SQL statement that inserts
rows into a temporary table.
INSERT INTO PS_CRS_FULL_TMP
What changes do you need to make to the code so that the Application Engine program will implement
parallel processing properly?
A. No changes to the code are needed as long as the temporary table has been properly configured for
parallel processing.
B. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO PS_CRS_FULL_TMP so that the
meta-SQL resolves to the correct state record at run time.
C. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Table(CRS_FULL_TMP) so that
the system variables resolve to the correct syntax at run time.
D. Replace INSERT INTO PS_CRS_FULL_TMP with INSERT INTO %Table(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct temporary table instance at run time.
E. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Temp(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct syntax and temporary table instance at run time.
Answer: D

Oracle   1Z0-242   1Z0-242   1Z0-242

NO.2 An Application Engine program uses a Do Select action. What occurs when the Select statement is
executed?
A. Each row returned by the Select statement is stored in the state record. The Select statement
continues until no more rows are returned. Then, the control passes to the calling section.
B. All rows returned by the Select statement are stored in a cursor. Then, the control is passed to the
calling section.
C. All rows returned by the Select statement are stored in the state record. Then, the control is passed to
the next section in the program.
D. All rows returned by the Select statement are stored in a cursor. The first row is stored in the state
record. Then, the remaining actions in the step are processed sequentially. Thereafter, the control returns
to the Do Select to fetch another row, until no more rows are returned.
E. When a row is returned, the remaining steps in the section execute and control returns to the calling
step.
F. When a row is returned, it is stored in the state record. Then, the control is passed to the calling section.
Answer: D

Oracle   1Z0-242 dumps   1Z0-242   1Z0-242

NO.3 Examine the join in this Select statement:
SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE A.TASK = B.TASK
AND A.RESOURCE = B.RESOURCE
Select the equivalent Select statement.
A. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(A.TASK, B.RESOURCE)
B. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Common(PROJECT A, EFFORT B)
C. SELECT A.TASK , B.EFFORT_AMT
FROM %Common(KEYS, PROJECT A, EFFORT B)
D. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(COMMON_KEYS, TASK A, EFFORT_AMT B)
E. SELECT A.TASK , B.EFFORT_AMT
FROM %Join(COMMON_KEYS, PROJECT A, EFFORT B)
Answer: E

Oracle dump   1Z0-242   1Z0-242   1Z0-242덤프

NO.4 View the Exhibit.
On the Employee Review page, you have a business rule with these requirements:
1. If Review Type is Supervisor, then the prompt for Reviewer ID returns only supervisors.
2. If Review Type is Peer or Performance, then the prompt for Reviewer ID returns all employees.
Select the three steps required to implement this business rule. (Choose three.)
A. Associate the REVIEWER_ID field with REVIEWER_VW.
B. Create REVIEWER_VW as a dynamic view of the EMPLOYEE table.
C. Add the DERIVED.EDITTABLE field to the page and make it invisible.
D. Set the prompt table edit for the REVIEWER_ID field to REVIEWER_VW.
E. Set the prompt table edit for the REVIEWER_ID field to DERIVED.%EDITTABLE.
F. Use a SQL Select statement in PeopleCode to populate the REVIEWER_VW view.
G. Use a conditional statement in PeopleCode to populate the DERIVED.EDITTABLE field.
Answer: CEG

Oracle dumps   1Z0-242   1Z0-242   1Z0-242   1Z0-242

NO.5 The Get Student Enrollments page uses a PeopleCode program to select and display rows based on
user input. When the user clicks Refresh, FieldChange PeopleCode populates a stand-alone rowset
using a Select method. When you test the program, the new rows are appended to the previous rows
instead of replacing them. How do you fix this problem?
A. Use a work scroll instead of a stand-alone rowset.
B. Add &Rowset.Flush(); after the Select method.
C. Use an Update method instead of a Select method.
D. Add &Rowset.Flush(); before the Select method.
E. Add &Rowset.Refresh (); after the Select method.
F. Add &Rowset.Refresh(); before the Select method.
Answer: D

Oracle인증   1Z0-242 pdf   1Z0-242   1Z0-242

NO.6 An Application Engine program inserts rows into PS_VENDOR.
The program encounters an error and abends (ends abnormally).
You correct the error, but now PS_VENDOR is in an unknown state.
Select the correct statement.
A. If Log File was enabled in Configuration Manager, a script file was created that you use to return the
database to its original state. After you correct the error, you can run the program again.
B. If Recover was enabled for the program, the changes to PS_VENDOR are rolled back. After you
correct the error, you can run the program again.
C. If Restart was enabled for the program, a checkpoint was saved with the last commit. After you correct
the error, you can restart the program and processing will resume from the point of the last commit.
D. If Resume was enabled in PeopleSoft Process Scheduler, the program automatically resumes
processing after the condition that caused the error is corrected.
E. If a state record was defined for the program, PS_VENDOR is restored based on parameters that were
written to the state record. Then you can restart the program using the same run control parameters.
Answer: C

Oracle dump   1Z0-242   1Z0-242   1Z0-242최신덤프   1Z0-242   1Z0-242 pdf

NO.7 View the Exhibit.
An object-oriented PeopleCode program traverses the data buffer to get the value for Session Number
(SESSION_NBR) in the Session Details record (PSU_CRS_SESSN) on the Course Sessions page.
The program uses a built-in function to instantiate the Level 0 object, then uses object methods to
instantiate the remaining data buffer objects.
Select the option that represents the order in which the program instantiates the data buffer objects.
A. &Row_Level0, &Row _Level1, &Record, &Field
B. &Rowset_Level0, &Row_Level1, &Record, &Field
C. &Rowset_Level0, &Rowset_Level1, &Row_Level1, &Record, &Field
D. &Rowset_Level0, &Row _Level0, &Rowset_Level1, &Row _Level1, &Record, &Field
Answer: D

Oracle덤프   1Z0-242   1Z0-242   1Z0-242

NO.8 Select three Application Engine action types that can be used to control program flow. (Choose three.)
A. Log Message
B. Call Section
C. XSLT
D. PeopleCode
E. Do While
F. Evaluate
Answer: BDE

Oracle자료   1Z0-242   1Z0-242   1Z0-242

NO.9 You want to examine the component buffer for the Customer Orders (PSU_CUST_ORDER )
component. Which four steps are necessary? (Choose four.)
A. Start the PeopleCode Debugger and set a breakpoint.
B. Access the Structure view on the PSU_CUST_ORDER component.
C. In Application Designer, select Component Buffers.
D. Access the Customer Orders component in the browser and trigger the breakpoint. Return to
PeopleSoft Application Designer when the breakpoint triggers.
E. Open, or create, a PeopleCode program that will execute while Customer Orders is running in the
browser.
F. Drill down through the component hierarchy in the Structure view on the PSU_CUST_ORDER
component.
G. In Application Designer, select Debug, View Component Buffers.
Answer: ADEG

Oracle   1Z0-242   1Z0-242자격증   1Z0-242 dump

NO.10 Here is a snippet of PeopleCode that uses the Fetch method of the SQL class.
&SQL = CreateSQL("Select EFFORT_AMT from PS_PSU_TASK_EFFORT where TASK= :1",
PSU_TASK_TBL.TASK);
&Var1 = &SQL.Fetch(&Var2);
Select the two correct statements. (Choose two.)
A. &Var2 specifies which row to fetch.
B. &Var2 specifies which field to fetch.
C. &Var1 is populated with TRUE if a row is fetched.
D. &Var1 is populated with the number of rows returned.
E. &Var2 is populated with EFFORT_AMT from the row fetched.
F. &Var1 is populated with EFFORT_AMT from the row fetched.
G. &Var1 is populated with EFFORT_AMT from the first row returned.
Answer: CE

Oracle최신덤프   1Z0-242   1Z0-242   1Z0-242

NO.11 An Application Engine program requires a loop that will exit after 1000 rows have been processed.
The COUNTER field in the state record is incremented in each iteration of the loop. Which option contains
code that could be used in a Do While action to test for COUNTER?
A. Do While %Bind(Counter) < 1000
B. %SELECT (COUNTER)
FROM PS_INSTALLATION
Where COUNTER < 1000
C. If %Bind(Counter) >= 1000 then
Exit;
D. %Select(COUNTER)
FROM PS_STATE_AET
Where COUNTER < 1000
E. %Select(COUNTER)
SELECT 'X'
FROM PS_INSTALLATION
WHERE %Bind(COUNTER) < 1000;
Answer: E

Oracle시험문제   1Z0-242기출문제   1Z0-242덤프   1Z0-242   1Z0-242자격증   1Z0-242자료

NO.12 Evaluate this PeopleCode snippet.
Local Array of Number &MyArray;
Local Any &Len, &Result;
&MyArray = CreateArray(3);
&MyArray[1] = 100;
&MyArray[2] = 200;
&MyArray[3] = 300;
&Result = &MyArray.POP();
&Len = &MyArray.LEN;
&End = &MyArray[&Len];
What are the correct values for &Result and &End?
A. &Result is 300
&End is 200
B. &Result is 300
&End is Null
C. &Result is 300
&End is 300
D. &Result is Null
&End is 300
E. &Result is 100
&End is 300
Answer: A

Oracle   1Z0-242기출문제   1Z0-242

NO.13 You add a dynamic call to an Application Engine program following these steps:
1. Add the fields AE_APPLID and AE_SECTION to the state record if they are not already present.
2. Build the state record.
3. Verify that the state record is the default state record for the Application Engine program.
4. In a PeopleCode action, use a conditional test to populate the fields AE_APPLID and AE_SECTION
with an Application Engine program name and section name, respectively.
5. Following the PeopleCode action, add a Call Section action.
Select the correct statement.
A. The Application Engine program will execute as expected.
B. Step 2 is not needed for dynamic call.
C. Step 3 is not needed.
D. Add a step after step 5 to insert a SQL action that will use the values in the state record to populate the
Program and Section fields of the Application Engine Call Section action.
E. Add a step after step 5 to select the Dynamic Call check box in the Call Section action.
F. Step 4 is wrong. The PeopleCode program should use the AESection class to issue the dynamic call.
Answer: E

Oracle   1Z0-242   1Z0-242   1Z0-242자료   1Z0-242인증

NO.14 View the Exhibit.
This run control page executes an Application Engine program that updates the Course table using the
parameters entered by a user.
In addition to the run control page, which three elements must be in place? (Choose three.)
A. A state record with fields to hold input parameters
B. Component variables to pass the input parameters
C. A data buffer object to retrieve the input parameters
D. Application Engine SQL to retrieve the input parameters
E. A PeopleCode record object to update the Course table
F. A Process Instance table to store run control parameters
G. A run control record with fields to store the input parameters
Answer: ADG

Oracle dumps   1Z0-242기출문제   1Z0-242자료   1Z0-242기출문제   1Z0-242

NO.15 You want to see exactly when a PeopleCode program fires in the context of the Component Processor
flow. Which two methods will work? (Choose two.)
A. Insert a Print() statement in the program.
B. Insert a WinMessage() statement in the program.
C. Insert a MessageCatalog() statement in the program.
D. Run the PeopleCode Debugger and insert a breakpoint on the program.
E. Run the PeopleCode Debugger and select Debug, View Component Buffers.
Answer: BD

Oracle자료   1Z0-242최신덤프   1Z0-242기출문제   1Z0-242   1Z0-242

NO.16 A Process Scheduler process is configured to run an Application Engine program. You need to modify
the process to use parameters entered by the user at run time. Which four additional steps do you need to
take? (Choose four.)
A. Create a process type for the new process.
B. Add bind variables to the command-line parameters.
C. Write a PeopleCode program to pass the parameters.
D. Create a state record with fields to pass input parameters.
E. Create a run control page with fields to enter the input parameters.
F. Create a run control record with fields to store the input parameters.
G. Modify the Application Engine program to retrieve the input parameters.
Answer: DEFG

Oracle자격증   1Z0-242   1Z0-242   1Z0-242

NO.17 View the Exhibit.
Your client is upgrading its purchasing application to use object-oriented PeopleCode to incorporate the
benefits of application classes.
The PeopleCode for the Purchase Order application is now encapsulated in an Application Package
called PSU_PO. The assign_order_nbr function is now ORDER_NBR, a method of the ORDER class.
You are tasked with modifying this program to call the new ORDER_NBR method.
Which four PeopleCode statements will you use in the new program? (Choose four.)
A. Class PSU_PO:ORDER;
B. &New.ORDER_NBR(PSU_PO_HDR.ORDER_NBR);
C. Import PSU_PO:ORDER;
D. Declare method PSU_PO:ORDER:ORDER_NBR;
E. &New = Create Order();
F. Local ORDER &New;
G. Method ORDER_NBR (&ORDER_NBR As Field out);
Answer: BCEF

Oracle최신덤프   1Z0-242기출문제   1Z0-242자격증   1Z0-242

NO.18 How do you configure Process Scheduler to initiate an Application Engine trace for SQL and Step?
A. Add %%TRACE%% %%SQL%% %%STEP%% to the parameter list for the Process Type.
B. On the Run Control page, select the SQL Trace and Step Trace check boxes.
C. On the Process Monitor page, select the SQL Trace and Step Trace check boxes.
D. On the Process Definition Override Options page, for Parameter List, select Append and enter
-TRACE 3.
E. On the Process Definition Override Options page, for Parameter List, select Append and enter -TRACE
SQL STEP.
F. On the Process Definition Override Options page, for Parameter List, select Append and
enter %%TRACE%% %%SQL%% %%STEP%%.
Answer: D

Oracle   1Z0-242   1Z0-242   1Z0-242최신덤프   1Z0-242덤프

NO.19 The Customer Orders page uses data from the ITEM table to perform price calculations. You decide to
write a PeopleCode program to create a stand-alone rowset that will load data from the ITEM table into
the data buffer. Select three PeopleCode statements that can be used with stand-alone rowsets. (Choose
three.)
A. &RS_Item = GetRowSet(SCROLL.ITEM);
B. &RS_Item = CreateRowSet(RECORD.ITEM);
C. &Price = &RS_Item(&i).ITEM.PRICE.Value;
D. &RS_Item.Select("Where ITEM = :1", CUST_ORDER.ITEM);
E. &RS_Item.Fill("Where CUST_TYPE = :1", CUST_ORDER.TYPE);
F. &RS_Item = ScrollSelect(1,Scroll.ITEM, Record.ITEM, ("Where CUST_TYPE = :1", CUST_ORDER.
CUST_TYPE);
Answer: BCE

Oracle pdf   1Z0-242   1Z0-242최신덤프   1Z0-242덤프   1Z0-242인증

NO.20 View the Exhibit.
A PeopleCode program at level 0 checks the values for Percent Available (PCT_AVAILABLE) at level 1.
Analyze this code snippet.
Local Rowset &RS_Level0, &RS_Level1;
Local Row &Row_Level0, &Row_Level1;
Local Record &Rec_TaskRsrc;
Local Field & Fld_PctAvail ;
&RS_Level0 = GetLevel0();
&Row_Level0 = &RS_Level0.GetRow(1);
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
&Row_Level1 = &RS_Level1.GetRow(1);
&Rec_TaskRsrc = &Row_Level1.GetRecord(Record.PSU_Task_RSRC);
&Fld_PctAvail = &Rec_TaskRsrc.GetField(Field.PCT_AVAILABLE);
&Pct = &Fld_PctAvail.Value;
Select the correct option.
A. The program will produce the expected results.
B. The program is missing a loop to process each row in the level 1 rowset.
C. The program is missing a loop to process each rowset in the level 1 row.
D. The program can be simplified to:
&Pct = &RS_Level0.PSU_Task_RSRC.PCT_AVAILABLE.Value;
E. This line of code is not needed:
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
F. The &RS_Level0 = GetLevel0(); function is missing the Level 0 scroll name.
Answer: B

Oracle dumps   1Z0-242덤프   1Z0-242최신덤프   1Z0-242자격증   1Z0-242

만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는Oracle 1Z0-242관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게Oracle 1Z0-242시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.